Assembly Guide

Most products from JardinSilence arrive partially assembled to help protect components during shipping while keeping setup as simple as possible for customers.

We understand that many customers want a straightforward setup experience — not a complicated project. For that reason, key components are pre-assembled whenever possible, and most customers complete setup using basic household tools in approximately 30 to 60 minutes.

If you need help at any point, contact our support team at support@jardinsilence.com and we will be happy to assist you.

What Comes Pre-Assembled

Depending on the product model, many major components may already be assembled before shipment, including:

  • Main frame sections
  • Rear wheel and drivetrain components
  • Electrical wiring connections
  • Brake cable routing
  • Battery mounting hardware

This helps reduce setup complexity and minimizes the amount of heavy assembly required after delivery.

Components You May Need to Attach

After unboxing, some final assembly steps may still be required, including:

  • Front wheel installation
  • Handlebar alignment
  • Seat post and saddle installation
  • Pedal installation
  • Basket or accessory mounting
  • Display or control panel connection
  • Brake adjustment and inspection

All required hardware and standard assembly tools are included unless otherwise noted in the product manual.

A printed instruction manual is included with your order and should always be used as the primary setup reference for your specific model.

Before You Begin

1. Have a Second Person Available

Many products are large and heavy once packaged. We strongly recommend having another person assist with moving, lifting, or stabilizing the unit during unboxing and setup.

2. Inspect the Packaging and Components

Before assembly:

  • Check the box for visible shipping damage
  • Inspect components carefully after opening
  • Do not discard packaging immediately

If anything appears damaged or missing, contact support@jardinsilence.com within 48 hours and include photos.

3. Organize All Parts

Lay out all included parts and hardware before beginning assembly.

Compare included components with the parts list provided in your manual to confirm nothing is missing.

4. Read the Included Manual

Assembly procedures may vary slightly between models.

Your printed manual contains the most accurate information regarding:

  • Hardware placement
  • Tightening instructions
  • Torque recommendations
  • Safety procedures

General Assembly Overview

The exact process varies by model, but setup typically follows these steps:

Step 1 — Install the Front Wheel

Secure the front wheel according to the instructions in your manual and ensure all fasteners are tightened evenly.

Step 2 — Attach the Handlebars

Align the handlebars straight with the front wheel and tighten the stem hardware securely without overtightening.

Step 3 — Install the Seat Post and Saddle

Adjust the seat height to a comfortable riding position and confirm the seat post remains above the minimum insertion marking.

Step 4 — Install the Pedals

Pedals are directional:

  • Right pedal tightens clockwise
  • Left pedal tightens counter-clockwise

Always begin threading by hand before fully tightening with a wrench.

Step 5 — Check Brake Function

Confirm that brake levers engage properly and stop the wheels securely before riding.

Brake inspection is one of the most important safety steps during assembly.

Step 6 — Connect Electrical Components

Connect display cables or electrical connectors according to the manual and confirm all connections are fully seated.

Step 7 — Attach Accessories

Install baskets, racks, or included accessories using the supplied hardware.

Do not exceed any stated weight limits for mounted accessories.

Pre-Ride Safety Checklist

Before first use, confirm the following:

  • Handlebars are securely tightened
  • Brakes engage properly
  • Pedals are fully tightened
  • Tires are inflated to recommended pressure
  • Battery is properly installed
  • Electrical connections are secure
  • Display or controls power on normally
  • No loose hardware or unusual movement is present

Do not operate the product until all safety checks are completed.

Tips for First-Time Riders

If you are unfamiliar with larger mobility or outdoor riding products, take time to practice gradually in a safe, open area.

Helpful tips include:

  • Start at lower assist or speed settings if applicable
  • Practice turning and stopping in a flat open space
  • Become comfortable with handling before riding in busy areas
  • Review all safety instructions in your manual before first use

Most customers become comfortable after a short adjustment period.

Need Help?

If something does not seem right during setup, do not force parts into place or continue assembly if you are unsure.

Our support team is happy to help with:

  • Assembly questions
  • Missing hardware
  • Adjustment guidance
  • Product troubleshooting
  • Setup clarification

Company Name: HARBOR RUSTIC LOGIC LLC
Address: 1500 N GRANT ST NUM 10506, DENVER, CO 80203
Email: support@jardinsilence.com

Support Hours: Monday through Friday, 9 AM – 6 PM MST
Typical Response Time: 1–2 business days